 <code>  //RAACO C11-44 COMPONENT RACK
    //JAGERMEISTER 4-SHOT COMMUNION TRAY
    $fn=100;
    difference(){
    union(){
    //main block
    translate([-66, -23, 0])
    cube([132,46,2]);
    //legs
    translate([-63,-20,0])  
    cylinder(h=20,d1=6,d2=6);
    translate([-63,20,0])  
    cylinder(h=20,d1=6,d2=6);
    translate([63,-20,0])  
    cylinder(h=20,d1=6,d2=6);
    translate([63,20,0])  
    cylinder(h=20,d1=6,d2=6);
    }
    //cup holes
    translate([-17,0,-1])  
    cylinder(h=4,d1=24,d2=23);
    translate([17,0,-1])  
    cylinder(h=4,d1=24,d2=23);
    translate([-51,0,-1])  
    cylinder(h=4,d1=24,d2=23);
    translate([51,0,-1])  
    cylinder(h=4,d1=24,d2=23);
    //plastic/speed saver holes
    translate([0,-14,-1])  
    cylinder(h=4,d1=14,d2=13);
    translate([0,14,-1])  
    cylinder(h=4,d1=14,d2=13);
    translate([34,-14,-1])  
    cylinder(h=4,d1=14,d2=13);
    translate([34,14,-1])  
    cylinder(h=4,d1=14,d2=13);
    translate([-34,-14,-1])  
    cylinder(h=4,d1=14,d2=13);
    translate([-34,14,-1])  
    cylinder(h=4,d1=14,d2=13);
    //hollows in legs
    translate([-63,-20,1])  
    cylinder(h=20,d1=4,d2=4);
    translate([-63,20,1])  
    cylinder(h=20,d1=4,d2=4);
    translate([63,-20,1])  
    cylinder(h=20,d1=4,d2=4);
    translate([63,20,1])  
    cylinder(h=20,d1=4,d2=4);
    }77</code>


{{Tag>[OpenSCAD 3D_Printing Clive_Listings]}}